Gun Part Sources

Some useful sources for gun parts and gunsmithing tools.

by Paul Mazan

Subscribe to our free newsletter to receive more information like this:

One of the most often asked questions I see on line and in person involves locating parts for firearms that need repair. Based on the questions I see people asking on Facebook both on the iiiAmerican Gunsmith site as well as the others I’ve been in, most people new to gunsmithing have no idea where to go for parts or tools. For that reason, I made an effort to compile a complete list.

Some days I spend more time chasing parts for guns I have in the shop to repair than I do actually repairing guns. That seems to be a common problem for many of us and I finally decided to put together a list of the suppliers I use on a regular basis. Here are some of the most useful sources I use.


If you have a firearm that is still in production the most obvious place to search for parts is the manufacturer. Even if the model is no longer in production the factory might have parts or can sometimes tell you who can supply those parts for the firearm. This is a list of some of the major firearms manufacturer’s web sites. Some sell parts directly others, may simply direct you to suppliers that sell their parts. Even if the model is no longer in production the factory can sometimes tell you who can supply parts for the firearm.

Factory Parts Contacts

Here are factory contact sites that can help with current production firearms.

Armalite (, 623/780-1050).
Armi Sport di Chiappa (, 937/835.5000).
Barrett Firearms (
Benelli USA (
Beretta Corp. USA (
Browning Arms Co. (
Charles Daly (
CimarronFirearms (
Colt’s Manufacturing (
Cooper Firearms (
Glock Inc. (
Heckler & Koch (
Hi-Point Firearms (
Ithaca Gun Co. (
Kimber Mfg. Inc. (
Marlin Firearms (
O.F. Mossberg & Sons (
Pedersoli Davide & C snc (
Perazzi Inc. USA (
Remington Arms Co. (
Ruger Firearms (
Savage Arms Inc. (
SIG Sauer Inc. (
Smith & Wesson (
SpringfieldArmory (
Taylors Firearms (
Thompson Center Arms Co. (
Traditions Performance Firearms (
Uberti (
Walther Arms (
Weatherby Inc.
Winchester Repeating Arms (

Parts Houses

The sources I use to look for firearms parts for guns that are no longer in production, aftermarket custom parts, and gunsmithing tools are listed below. This is may not a complete list of every possible parts suppliers in existence, however, this my personal list of the supply sources have had consistent good results from over the years and can recommend.

Apex Gun Parts. They are a good source of rifle and pistol parts, including some current firearms and many older military arms. (719/481-2050,,

Bob’s Gun Shop Inc. They have parts for many out of production firearms. (PO Box 200, Royal AR 71968. Fax orders or phone 501/767-2750.

Brownells Inc. The obvious place for gunsmithing tools and supplies, they also stock many recent and current production factory new parts as well as aftermarket parts. (3006 Brownells Parkway, Grinnell IA 50112, 800/741-0015, Fellow author RK Campbell once made a reference to this popular and long-time online site as a pirate site. Well, not in the sense of being illegal but it can feel that way. eBay is a multinational e-commerce site that has facilitates consumer-to-consumer and business-to-consumer sales through its website since 1995. While obviously not just a gun parts site, many shop owners, companies, and individuals with parts often use the site to sell and trade used gun parts at auction.

Jack First Gun Parts. One of the “name” gun parts supply houses, they have a large selection of parts for various firearms. (605/343-8481,

Numrich Gun Parts Corporation. Another big name in used gun parts. (226 Williams Ln., Kingston NY 12401, 866/686-7424, An auction site similar to eBay that focuses on firearms, including gun parts. (

John Gunderson Antique Militaria. A source of original parts for antique and historic firearms. (518/668-2221,

International Military Antiques. As you can guess, they handle mostly antique guns and accessories with an emphasis on collectibles, including some parts stripped from old guns. (908/903-1200,

Midway USA. Probably best known for their retail sales, Midway also stocks aftermarket parts for modern firearms and gunsmithing tools. (800/243-3220,

Popperts Gun Parts. Popperts has a large selection of parts for modern firearms. (1 Limeklin Pike, Glenside PA 19038, 215/887-2391,

S&S Firearms. S&S stocks parts for original and reproduction antique firearms, including uniforms and reenactor supplies and accessories. (74-11 Myrtle Ave, Glendale NY 11385, 718/497-1100,

Pecatonica River Long Rifle Supply. Known for their selection of single shot and antique repeater stocks and muzzle loading guns and parts. (PO Box 2791, Rockford IL 61132, 815/968-1995,

Richards Microfit Stocks Inc. Richards stocks gunstocks for most modern rifles from classic to wild. (800/895-7420,

Track of the Wolf, Inc. Muzzloading parts, stocks, barrels, and kits. (18308 Joplin St NW, Elk River MN 55330, 763/633-2500,

Treebone Carving. Treebone has a great selection of parts for Winchester and Marlin lever guns, rolling block action rifles, Ruger #1 and #3, and Trapdoor and Sharps stocks. (PO Box 496, Wellington NV 89444, 775/465-1080,

Wisner’s, Inc. A great source for more modern gun parts that might not be carried by the original manufacturer. (PO Box 58, Adna, WA 98522, 360/748-4590,

Wolff Gunsprings. Wolff makes replacement springs for most modern firearms. (PO Box 458, Newtown Square PA 19073, 800/545-0077,

Womacks Rolling Block Parts. As the name implies, they stock original Remington Rolling Block parts. (7343 Annette Ave., Fallon NV 89406, 775/423-0810,

Searching Beyond

As mentioned above, I make no claim that this is a complete list but I have often found that if a part I need can be had, these sources are most likely to have it. Of course, that’s been my experience for my projects. If you are still unable to locate the part you need you’ll need to look further.

Some tips for searching. Use more than one search engine. is the most popular and obvious but far from the only one. Others worth using are, (which also emphasizes user privacy),,,,,, and While all search engines index publicly-available websites, the approach each one takes differs a bit and can result in different results during a search. If your first search comes up dry, try using a different search engine.

Vary your search terms. A good way to begin is typing in the manufacturer name, model number, and any other part names or any particulars you know. For example, a search for “Remington 700 parts for sale” should get you a number of listings of parts sellers. You can then refine that by modifying key words, such as replacing “parts” for more specific part names and variations. Look up the manufacturer’s schematic and/or owner’s manual to know the exact name the maker used to call their part. One example is the part that moves a shotshell from the level of the tube magazine up to be chambered. They can be referred to as lifters, carriers, or elevators depending on the make and manufacturer.

Understand common search engine syntax. Surrounding a word or phrase in quotation marks prioritizes results having that exact word or phrase. Example, a search for “Remington 700” “parts” will be more specific with results having an exact match to specific phrase “Remington 700” that also includes the word “parts” in the result. Dropping the quotation marks indicates a search for results that have these words or numbers anywhere in the result and not necessarily together, which may not be what you want.

Exclude results by adding a “-” to a word or phrase. For example, Remington is also a brand name of electric razors and shavers. So, a search of “Remington” -shave would exclude any result having Remington that also has the word “shave” in it.

Searches can also be confined to a specific site, replacing http: with site: as the protocol. If you’re only interested in results from, try typing “Remington” into the address bar of your browser to find pages, posts, or comments with the word “Remington” limited to that specific site.

Don’t be afraid to ask for help in an online forum but be smart about it. Before posting a question, search on your own and then include what you searched for, how you went about it, what the results were, and what you’re looking for but haven’t found. Before asking on a particular site or forum, do a site-specific search on that forum ( ) to double check your question or something similar hasn’t already been asked and answered. Include the fact you did this to show that you were thorough in searching on your own before asking for help.

As I said, for some projects the search for needed parts can take as long as the repair itself. Knowing some great supply places and how to search further on your own can help make finding what you need a little easier.

Read more in the July 2022 issue.

Don’t miss a single issue. Subscribe now or renew your subscription.

For non-subscribers wanting free access, submit one free article to use on our site and we’ll send you a complete digital copy of any issue of your choice (April 2006 to current).

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s